User manual

EN
MS660 Using MagicSafe
49
11.6 Using the convenience locking function
If the vehicle has been equipped with a convenience module and software
function 4 “Convenience locking function” is activated, you can use the hand-held
transmitter to, e. g.:
• Close windows
• Close the sunroof
• Lock the boot or fuel tank lid
• Switch on dipped headlights
• Switch on the parking heating
To do this, proceed as follows:
➤ Press and hold the “Lock” button until e. g. the vehicle windows have closed
completely.
I
11.7 Displaying the cause of the alarm
MagicSafe stores triggered alarms. The memory can display the last five alarm
situations.
If an alarm was triggered, this is indicated by a short flashing of the indicator (0.5 sec.)
when the vehicle is unlocked.
This is how to display the cause of the alarm:
➤ Deactivate the alarm system by pressing the “Unlock” button.
➤ Press the “Lock” and “Unlock” buttons simultaneously.
✓ The status LED shows the last five saved alarm causes in the form of flashing
signals, in accordance with the following list:
NOTE
Alternatively, you can program the control to a fixed duration of 25 sec.
(software function 19, see chapter “Programming MagicSafe” on
page 36).
MS660-IO-DE-DA.book Seite 49 Mittwoch, 24. August 2016 2:28 14