User manual

Intended use MSH60, MSH601

5 Intended use

The seat heater MagicComfort MSH60 (ref. no. 9600000393) and MSH601

(ref. no. 9600000394) are designed for installation in the front vehicle seats.

6 Technical description

The heating elements for the seat heater MagicComfort MSH60 and MagicComfort

MSH601 can be installed in the driver's seat and in the passenger seat.

The shape of the seat is not altered by the heating elements.

The seat heater is operated using a switch.

7 Installing the seat heater

7.1 Tools required (fig. 1, page 3)

For installation and assembly you will need the following tools:

• Drill bit set (1)

• Drill (2)

• Screwdriver (3)

• Set of ring or open-ended spanners (4)

• Measuring ruler (5)

• Hammer (6)

• Centre punch (7)

To make and test the electrical connection, the following tools are required:

• Diode test lamp (8) or voltmeter (9)

• Crimping tool (10)

• Insulating tape (11)

• Hot air blower (13)

NOTICE!

For vehicles equipped with side airbags in the seat backrests, seat

occupancy detection or child seat detection, observe the vehicle

manufacturer's specifications.

MSH60-MSH601-IO-16s.book Seite 12 Dienstag, 30. August 2016 6:23 18