Instruction Manual
EN
Operation CFX95DZW
14
➤ Remove two plastic covers from the centre hinge (A).
➤ Remove four screws from the centre hinge (B) and take off the hinge.
➤ Remove the plastic cover from new centre hinge position with a small
screwdriver and re-fit to old hinge position (C).
➤ Re-fit centre hinge in new position.
➤ Insert the lids in the hinges on the opposite side (D).
Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit as
follows:
➤ Switch on the cooler.
➤ Press the “SET” button (fig. 3 4, page 10) three times.
➤ Use the “UP +” (fig. 3 10, page 10) or “DOWN –” (fig. 3 9, page 10) buttons
to select Celsius or Fahrenheit.
✓ The selected temperature units then appear in both displays for a few seconds.
The displays flash several times before returning to the current temperature.
A
B
C
D
6
CFX-95DZW--O-AU.book Seite 14 Mittwoch, 2. November 2016 12:27 12