Product Manual

EN
RUC6408X, RUC8408X Installing the refrigerator
13
•
Fit an air deflection plate (fig. 4 4, page 12) above the compressor so that the
heat does not accumulate in the vehicle.
Installation with one lower rear vent and one roof vent
I
NOTE
This installation method is satisfactory for refrigerator performance, but
not the preferred method due to lack of service access to the compres-
sor shelf area.
Pos. in
fig. 5,
page 13
Description
1 Maximum height is equal to 100 mm below the compressor shelf
2 LS300 vent
3 Roof vent
≥100 mm
1
2
3
5
RUC8408X--IO-AU.book Seite 13 Montag, 13. August 2018 1:33 13