Product Manual

EN
Installing the refrigerator RUC6408X, RUC8408X
16
7.3 Installing the drain water hose
➤ To avoid damage to the drain water hose, position the hole for the drain water
hose in a way that the hose does not kink.
➤ Drill a hole through the vehicle floor at the rear of the refrigerator.
➤ Install the drain water hose through the drilled hole. Ensure that the drain water
hose is long enough in order to drain the water outside of the vehicle.
➤ DO NOT shorten the drain hose. The excess length will enable partial extraction
of the refrigerator if required for service access.
➤ Ensure that the drain water hose is not kinked.
➤ Seal the area around the drain water hose.
7.4 Installing the ventilation grille
No. in
fig. 0
Description
1Slider
2 Ventilation grille
3 Installation frame
3
2
1
0
RUC8408X--IO-AU.book Seite 16 Montag, 13. August 2018 1:33 13