Specifications

ANALOG DUCTED INSTALLATION INSTRUCTIONS

8. INSTALLATION OF COLD CONTROL

A. Remove parts package, control box and thermostat from the 3107541.XXX or 3107546.XXX Control Kit carton.

B. Freeze Control Installation 579, 590, 591, & 595 Series Brisk Air Models (See FIG. 7.)

1. Snap freeze control into place on return bend located at left side of evaporator coil as follows:

a. Locate “D” shaped notch in flange of evaporator coil.

b. Place the horseshoe end of the freeze control through this notch and snap onto the coil return bend. When positioned

correctly, control wires will be 90

to direction of coil fin surface.

c. Remove installation notice hang tag from freeze control.

C. Freeze Control installation on 600 Series Penguin Models (See FIG. 8.)

1. Snap freeze control into place on return bend located at right side of evaporator coil as follows:

a. Locate “D” shaped notch in flange of evaporator coil.

b. Place the horseshoe end of the freeze control through this notch and snap onto the coil return bend. When positioned

correctly, control wires will be 90

to direction of coil fin surface.

c. Remove installation notice hang tag from freeze control.

FIG. 8

FIG. 7

Brisk Air Model Series

579, 590, 591, & 595

Coil

Return

Bend

Remove

Hang Tag

Freeze Control

With Wires To Left Side