Operating instructions
52
Select
Auto/ON SwitchAuto/ON Switch
Auto/ON SwitchAuto/ON Switch
Auto/ON Switch operation as follows:
(Lower right switch at bottom of thermostat)
a.
Auto PositionAuto Position
Auto PositionAuto Position
Auto Position: Air conditioner fan runs whenever
cooling is required and stops whenever cooling is not
required.
b.
On PositionOn Position
On PositionOn Position
On Position: Air conditioner fan runs continuously to
circulate air in RV.
Set the
Heat/Off/Cool SwitchHeat/Off/Cool Switch
Heat/Off/Cool SwitchHeat/Off/Cool Switch
Heat/Off/Cool Switch to cool position
(Located at lower left side of thermostat)
The air conditioner will now come on when cooling is
required and cycle off when the temperature level selected
is reached.
Wait at least two (2) minutes before restarting the airWait at least two (2) minutes before restarting the air
Wait at least two (2) minutes before restarting the airWait at least two (2) minutes before restarting the air
Wait at least two (2) minutes before restarting the air
conditioner after shutting off with either the Heat/Off/conditioner after shutting off with either the Heat/Off/
conditioner after shutting off with either the Heat/Off/conditioner after shutting off with either the Heat/Off/
conditioner after shutting off with either the Heat/Off/
Cooling Switch or the Temperature Set Lever. ThisCooling Switch or the Temperature Set Lever. This
Cooling Switch or the Temperature Set Lever. ThisCooling Switch or the Temperature Set Lever. This
Cooling Switch or the Temperature Set Lever. This
allows the refrigerant pressure in the air conditioner toallows the refrigerant pressure in the air conditioner to
allows the refrigerant pressure in the air conditioner toallows the refrigerant pressure in the air conditioner to
allows the refrigerant pressure in the air conditioner to
equalize and will allow the compressor to restartequalize and will allow the compressor to restart
equalize and will allow the compressor to restartequalize and will allow the compressor to restart
equalize and will allow the compressor to restart
easily.easily.
easily.easily.
easily.
HEATING OPERATIONHEATING OPERATION
HEATING OPERATIONHEATING OPERATION
HEATING OPERATION
(If Furnace is connected to Thermostat)(If Furnace is connected to Thermostat)
(If Furnace is connected to Thermostat)(If Furnace is connected to Thermostat)
(If Furnace is connected to Thermostat)
Set Temperature Set Lever to desired temperature level
(located at top of thermostat).
Set the Heat/Off/Cool Switch to heat position (located at
lower left side of thermostat).
The furnace will now come on when heat is required and
cycle off when temperature level selected is reached.
SPECIAL FEATURESPECIAL FEATURE
SPECIAL FEATURESPECIAL FEATURE
SPECIAL FEATURE:
When thermostat:
Heat/Off/Cool SwitchHeat/Off/Cool Switch
Heat/Off/Cool SwitchHeat/Off/Cool Switch
Heat/Off/Cool Switch is in the OFF or HEAT position
and
Auto/On SwitchAuto/On Switch
Auto/On SwitchAuto/On Switch
Auto/On Switch is in the ON position, the air condi-
tioner fan will run continuously to circulate the air inside the
RV.