Operating instructions

ManualsBrandsDometic ManualsHeat Pump630025

With System Switch in the OFF, Fan Switch in HI

AUTO or LO AUTO and room temperature ABOVE or

BELOW setpoint temperature, you should NOT have

voltage between brown wire to violet, white, black, yel-

low or blue wires.

With System Switch in OFF, Fan Switch in LO ON

and room temperature ABOVE or BELOW setpoint tem-

perature, you should have voltage between brown wire

(Pin 7) to black wire (Pin 4). You should NOT have volt-

age between brown wire to violet, white, yellow or blue

wires.

With System Switch in OFF, Fan Switch in HI ON

and room temperature ABOVE or BELOW setpoint tem-

perature, you should have voltage between brown wire

(Pin 7) to black wire (Pin 4) and blue wire (Pin 6). You

should NOT have voltage between brown wire to violet,

white or yellow wires.

With System Switch in HEAT PUMP, Fan Switch in

HI AUTO and room temperature ABOVE setpoint tem-

perature, you should NOT have voltage between brown

wire to violet, white, black, yellow or blue wires. With

room temperature BELOW setpoint temperature, you

should have voltage between brown wire (Pin 7) to white

wire (Pin 3), black wire (Pin 4) and blue wire (Pin 6).

You should NOT have voltage between brown wire to

violet or yellow wires.

NONO

TE:TE:

TE:

When setpoint temperature is cWhen setpoint temperature is c

When setpoint temperature is c

hanghang

hang

eded

aboabo

abo

ve or belove or belo

ve or belo

w rw r

w r

oom temperatureoom temperature

oom temperature

there will be a there will be a

there will be a

three (3) minthree (3) min

three (3) min

ute delaute dela

ute dela

y in "active" terminalsy in "active" terminals

y in "active" terminals.

With System Switch in HEAT PUMP, Fan Switch in

LO AUTO and room temperature ABOVE setpoint tem-

perature, you should NOT have voltage between brown

wire to violet, white, black, yellow or blue wires. With

room temperature BELOW setpoint temperature, You

should have voltage between brown wire (Pin 7) to white

wire (Pin 3) and black wire (Pin 4). You should NOT

have voltage between brown wire to violet, yellow or

blue wires.

NONO

TE:TE:

TE:

When setpoint temperature is cWhen setpoint temperature is c

When setpoint temperature is c

hanghang

hang

eded

aboabo

abo

ve or belove or belo

ve or belo

w rw r

w r

oom temperatureoom temperature

oom temperature

there will be a there will be a

there will be a

three (3) minthree (3) min

three (3) min

ute delaute dela

ute dela

y in "active" terminalsy in "active" terminals

y in "active" terminals.

With System Switch in HEAT PUMP, fan switch in

LO ON and room temperature ABOVE setpoint tem-

perature, you should have voltage between brown wire

(Pin 7) to black wire (Pin 4). You should NOT have volt-

age between brown wire to violet, white, yellow or blue

wires. With room temperature BELOW setpoint tem-

perature, you should have voltage between brown wire

(Pin 7) to white wire (Pin 3) and black wire (Pin 4). You

should NOT have voltage between brown wire to violet,

yellow or blue wires.

NONO

TE:TE:

TE:

When setpoint temperature is cWhen setpoint temperature is c

When setpoint temperature is c

hanghang

hang

eded

aboabo

abo

ve or belove or belo

ve or belo

w rw r

w r

oom temperatureoom temperature

oom temperature

there will be a there will be a

there will be a

three (3) minthree (3) min

three (3) min

ute delaute dela

ute dela

y in "active" terminalsy in "active" terminals

y in "active" terminals.

With System Switch in HEAT PUMP, Fan Switch in

HI ON and room temperature ABOVE setpoint tem-

perature, you should have voltage between brown wire

(Pin 7) to black wire (Pin 4) and blue wire (Pin 6). You

should NOT have voltage between brown wire to violet,

white or yellow wires. With room temperature BELOW

setpoint temperature, you should have voltage between

brown wire (Pin 7) to white wire (Pin 3), black wire (Pin

4) and blue wire (Pin 6). You should NOT have voltage

between brown wire to violet or yellow wires.

NONO

TE:TE:

TE:

When setpoint temperature is cWhen setpoint temperature is c

When setpoint temperature is c

hanghang

hang

eded

aboabo

abo

ve or belove or belo

ve or belo

w rw r

w r

oom temperatureoom temperature

oom temperature

there will be a there will be a

there will be a

three (3) minthree (3) min

three (3) min

ute delaute dela

ute dela

y in "active" terminalsy in "active" terminals

y in "active" terminals.

BefBef

Bef

ore core c

ore c

hechec

hec

king the thermostat fking the thermostat f

king the thermostat f

or operation in Aor operation in A

or operation in A

UX.UX.

UX.

HEAHEA

HEA

T, verify that DC volts (10 to 16) are available be-

tween the green wire (+) and brown wire (–) at the back

of the thermostat.

With System Switch in AUX HEAT, Fan Switch in HI

AUTO and room temperature ABOVE setpoint tempera-

ture, you should NOT have voltage between brown wire

to violet, white, black, yellow or blue wires. With room

temperature BELOW setpoint temperature, you should

have voltage between brown wire (Pin 7) to violet wire

(Pin 1). You should NOT have voltage between brown

wire to white, black, yellow or blue wires.

NONO

TE:TE:

TE:

When setpoint temperature is cWhen setpoint temperature is c

When setpoint temperature is c

hanghang

hang

eded

aboabo

abo

ve or belove or belo

ve or belo

w rw r

w r

oom temperatureoom temperature

oom temperature

there will be a there will be a

there will be a

three (3) minthree (3) min

three (3) min

ute delaute dela

ute dela

y in "active" terminalsy in "active" terminals

y in "active" terminals.

With System Switch in AUX HEAT, Fan Switch in

LO AUTO and room temperature ABOVE setpoint tem-

perature, you should NOT have voltage between brown

wire to violet, white, black, yellow or blue wires. With

room temperature BELOW setpoint temperature, you

should have voltage between brown wire (Pin 7) to vio-

let wire (Pin 1). You should NOT have voltage between

brown wire to white, black, yellow or blue wires.

NONO

TE:TE:

TE:

When setpoint temperature is cWhen setpoint temperature is c

When setpoint temperature is c

hanghang

hang

eded

aboabo

abo

ve or belove or belo

ve or belo

w rw r

w r

oom temperatureoom temperature

oom temperature

there will be a there will be a

there will be a

three (3) minthree (3) min

three (3) min

ute delaute dela

ute dela

y in "active" terminalsy in "active" terminals

y in "active" terminals.

With System Switch in AUX HEAT, Fan Switch in

LO ON and room temperature ABOVE setpoint tem-

perature, you should have voltage between brown wire

(Pin 7) to black wire (Pin 4). You should NOT have volt-

age between brown wire to violet, white, yellow or blue

wires. With room temperature BELOW setpoint tem-

perature, you should have voltage between brown wire

(Pin 7) to violet wire (Pin 1) and black wire (Pin 4). You

should NOT have voltage between brown wire to white,

yellow or blue wires.

NONO

TE:TE:

TE:

When setpoint temperature is cWhen setpoint temperature is c

When setpoint temperature is c

hanghang

hang

eded

aboabo

abo

ve or belove or belo

ve or belo

w rw r

w r

oom temperatureoom temperature

oom temperature

there will be a there will be a

there will be a

three (3) minthree (3) min

three (3) min

ute delaute dela

ute dela

y in "active" terminalsy in "active" terminals

y in "active" terminals.