Operating instructions

94
8F. CABLE ASSEMBLY
A.A.
A.A.
A.
MODEL 39224.601 (AIR CONDITIONER)MODEL 39224.601 (AIR CONDITIONER)
MODEL 39224.601 (AIR CONDITIONER)MODEL 39224.601 (AIR CONDITIONER)
MODEL 39224.601 (AIR CONDITIONER)
The cable assembly is a five-wire assembly. The thermostat
end has a five-pin flat connector:
Pin 1 = Yellow Wire
Pin 2 = White Wire
Pin 3 = Orange Wire
Pin 4 = Blue Wire
Pin 5 = Black wire
The unit end has a six-pin square connector.
Pin 1 = Yellow Wire
Pin 2 = White Wire
Pin 3 = Orange Wire
Pin 4 = Blue Wire
Pin 5 = Black Wire
To check the cable assembly, first unplug each end of the cable
assembly. Next, check for continuity on each wire such as Pin
1 to Pin 1, etc. Continuity should be present from Pin 1 to Pin
1, etc.
Next, check for continuity from one wire to each of the other
wires, such as Pin 1 to Pin 2; then Pin 1 to Pin 3, etc. No
continuity should be present from one wire to any other wire in
the assembly. Be sure to check each wire.
39224.601 AIR CONDITIONER39224.601 AIR CONDITIONER
39224.601 AIR CONDITIONER39224.601 AIR CONDITIONER
39224.601 AIR CONDITIONER
CABLE ASSEMBLYCABLE ASSEMBLY
CABLE ASSEMBLYCABLE ASSEMBLY
CABLE ASSEMBLY
(BACK OF CONNECTOR)(BACK OF CONNECTOR)
(BACK OF CONNECTOR)(BACK OF CONNECTOR)
(BACK OF CONNECTOR)
39424.601 HEAT PUMP39424.601 HEAT PUMP
39424.601 HEAT PUMP39424.601 HEAT PUMP
39424.601 HEAT PUMP
CABLE ASSEMBLYCABLE ASSEMBLY
CABLE ASSEMBLYCABLE ASSEMBLY
CABLE ASSEMBLY
Pin 1 = Violet Wire
Pin 2 = Red Wire
Pin 3 = White Wire
Pin 4 = Black Wire
Pin 5 = Yellow Wire
Pin 6 = Blue Wire
Pin 7 = Brown Wire
Pin 8 & 9 = Open
B.B.
B.B.
B.
MODEL 39424.601 HEAT PUMPMODEL 39424.601 HEAT PUMP
MODEL 39424.601 HEAT PUMPMODEL 39424.601 HEAT PUMP
MODEL 39424.601 HEAT PUMP
The cable assembly is a ten-wire cable with seven of the ten
wires used. The thermostat end has a 10-pin flat connector
with seven positions used.
Pin 1 = Violet Wire
Pin 2 = Red Wire
Pin 3 = White Wire
Pin 4 = Black Wire
Pin 5 = Yellow Wire
Pin 6 = Blue Wire
Pin 7 = Brown Wire
The unit end has a 9-pin square connector with seven
positions used.
Pin 1 = Violet Wire
Pin 2 = Red Wire
Pin 3 = White Wire
Pin 4 = Black Wire
Pin 5 = Yellow Wire
Pin 6 = Blue Wire
Pin 7 = Brown Wire
To check the cable assembly, first unplug each end of the
cable assembly. Next, check for continuity on each wire,
such as Pin 1 to Pin 1, then Pin 2 to Pin 2, etc. Continuity
should be present from Pin 1 to Pin 1, then Pin 2 to Pin 2,
etc.
Next, check for continuity from one wire to each of the other
wires, such as Pin 1 to Pin 2, then Pin 1 to Pin 3, etc. NO
continuity should be present from one wire to any other wire
in the assembly. Be sure to check each wire.