Product Manual

EN
Using the device (7350, 7300) FanTastic Vent
18
➤ If the roof is thinner than 25 mm, use the spacer (accessory).
➤ Install the inner frame (fig. b, page 8).
➤ After installing, check again the fan works properly.
➤ If necessary, enter the new vehicle height and weight in the vehicle documents.
7.1 Mounting the holder for the remote control
(7350, 7300)
➤ Fasten the holder of the remote control onto the wall with two screws (fig. c,
page 9).
8Using the device (7350,7300)
8.1 Control elements
The remote control has the following buttons and displays:
The fan control confirms commands from the remote control with a beep. If a single
beep is not emitted, the command has not been received.
A double beep indicates that a command is not permitted.
No. in
fig. d,
page 10
Description
1 To switch the fan on/off
2 “Auto” LED
3 To set the temperature
4 To set the outlet/inlet air (for 7350 and 6350 only)
5 “Rain Sensor Off” LED
6 Press briefly: To open/close the cover hood
Press for 3 seconds: To switch the rain sensor on/off
7 To set the fan speed
8 “Manual” LED
FanTastic-Vent-IO-16s.book Seite 18 Freitag, 5. Mai 2017 11:41 11
“More information https://www.caravansplus.com.au"