Installation Guide

7
PREPARE FOR INSTALLATION
FIG. 8
Mounting Below Rail
Top Mounting Bracket
Awning Rail
FRTA
FIG. 9
Top Mounting
Bracket
Mounting On Rail
Awning Rail
FRTA
FIG. 10
Top Mounting
Bracket
Awning Rail
With Drip
Channel
Top Bracket
Spacer
2. Make sure arm assemblies do not restrict use of
doors, windows, etc. See (FIG. 11).
FIG. 11
Arm Assemblies
INSTALL AWNING
A. Insert Awning Fabric Into Awning Rail
1. With awning safety lock in roll down position, un-
furl awning fabric 1 revolution.
Unfurling 1 revolution will allow enough
space between RV wall and awning hard-
ware to guide fabric as it is inserted into
awning rail.
2.  LIFTING HAZARD. Use proper
lifting technique and control when lifting product.
Failure to obey this caution could result in injury.
With one person grasping each arm assembly,
carefully lift entire awning assembly upright.
Then carry awning to prepared (ared) awning
rail end. See (FIG. 12).
FIG. 12
Awning
Rail
Arm
Assembly
FRTA