Manual

EN
General safety instructions MCA1215, MCA1225, MCA1235
6
A
NOTICE!
 Use ductwork or cable ducts if it is necessary to lay cables
through metal panels or other panels with sharp edges.
 Do not lay the 230 V mains cable and the 12 V DC cable in the
same duct.
 Do not lay the cable so that it is loose or heavily kinked.
 Fasten the cables securely.
 Do not pull on the cables.
2.4 Operating the device safely
D
DANGER! Danger of electrocution
 Do not touch exposed cables with your bare hands. This applies
especially when operating the device from the AC mains.
 To be able to disconnect the device quickly from the mains, the
socket must be close to the device and be easily accessible.
!
WARNING!
 Only use the device in closed, well-ventilated rooms.
 Do not operate the device in systems with lead acid batteries.
These batteries give off explosive hydrogen gas that can be
ignited by sparks on electrical connections.
!
CAUTION!
 Do not operate the device
– In salty, wet or damp environments
– In the vicinity of corrosive fumes
– In the vicinity of combustible materials
– In areas where there is a danger of explosions.
 Before starting the device, ensure that the power supply line
and the plug are dry.
 Always disconnect the power supply when working on the
device.
 Please observe that parts of the device may still conduct voltage
even if the fuse has blown.
 Do not disconnect any cables when the device is still in use.