Instruction manual

EN
B1600PLUS, B2200, B2600 Technical description
39
7.2 Ventilation LED
The ventilation LED (fig. 3, page 4) shows the following states:
7.3 Remote control
All settings of the device (e. g. temperature settings, timer programming) are
transmitted to the roof air conditioner by remote control.
The following control and display elements are available on the remote
control (fig. 4, page 4) :
No. Explanation
1 Status LED
No light: The roof air conditioner is switched off.
Orange light: The roof air conditioner is in stand-by mode.
Green light: The roof air conditioning is switched on.
only B2600: Flashing
green light:
Defrosting/Starting heat pump
Red light: Only if the system is connected to 12 Vg: the
supply voltage of 230 Vw is not available.
Slowly flashing red
light:
Malfunction in interior temperature sensor E1
Quickly flashing red
light:
Malfunction in exterior temperature sensor E2
Very quickly flashing
red light:
Malfunction in exterior temperature sensor E3
No. Explanation
1 Digital display:
displays the following:
–Time
– Selected room temperature (target value) in °C or °F
– Actual room temperature
– Air conditioning mode
– Blower level
– Symbols for active additional functions
– Battery status
2
Button :
Switches the roof air conditioner and remote control on or to stand-by mode
3
Button :
Selects the blower setting