Operating instructions

EN
Installing the device Hobs and Combinations
20
6.3 Connecting the device to the gas supply
!
You must use a rigid gas line for the connection.
Observe the following instructions for the connection:
• Observe the national requirements.
• Use only steel pipe ∅
5
/
16
x
3
/
64
in. (∅8 x 1 mm) (welded, seamless steel or stain-
less steel)
• Fasten the gas line to the side or rear wall of the surrounding furniture parts so that
no loads are placed on the actuators.
• The entire gas line must be free of stress.
➤ Connect the pipes as shown (fig. 8, page 7).
➤ Attach a sign above the device with the following text:
“WARNING!
When cooking, additional ventilation must be provided, for example, by
opening windows near the device.
Never use this device as a space heater to heat or warm the room. Doing so may
result in carbon monoxide poisoning and overheating of the device.”
➤ Open the gas supply.
!
➤ Check all connections for leaks with leak spray.
There are no leaks if no bubbles form.
6.4 Connecting the device to the power supply
(models with electronic ignition only)
➤ Connect the device as shown (fig. 9, page 7).
➤ Add a 1 A fuse in the plus line near the battery.
WARNING! Risk of injury
Only use propane or butane gas cylinders with a certified pressure
reduction valve and suitable head. Compare the pressure information
on the type plate with the pressure information on the propane or
butane gas cylinder.
WARNING! Risk of injury
Never check for leaks with an open flame or near sources of ignition.
PI-MO-CE-KSK_AMER.book Seite 20 Donnerstag, 21. Mai 2020 10:32 10