Operating Manual
Table Of Contents
- 1 Explanation of symbols
- 2 Safety instructions
- 3 Scope of delivery
- 4 Accessories
- 5 Intended use
- 6 Function description
- 6.1 Scope of functions
- 6.2 Operating and display elements
- 7 Operation
- 7.1 Before initial use
- 7.2 Energy saving tips
- 7.3 Reversing the lid opening direction
- 7.4 Connecting the cooler
- 7.5 Using the cooler
- 7.6 Using the display
- 7.7 Locking/unlocking the display
- 7.8 Selecting the temperature units
- 7.9 Setting the temperature
- 7.10 Using the battery protection
- 7.11 Setting the display‘s brightness
- 7.12 Switching on or off the compartments (only CFX 3 75DZ, CFX 3 95DZ)
- 7.13 Using the ice maker (only CFX 3 55IM)
- 7.14 Downloading the CFX3 app
- 7.15 Setting the Bluetooth signal and connecting to the app
- 7.16 Setting the WiFi signal and connecting to the app
- 7.17 Changing CFX name and password in the app
- 7.18 Resetting the app password (WiFi only)
- 7.19 Resetting to factory settings
- 7.20 USB port for power supply
- 7.21 Defrosting the cooler
- 7.22 Replacing the AC fuse
- 7.23 Replacing the DC fuse
- 7.24 Replacing the DC plug fuse
- 7.25 Replacing the light PCB
- 8 Cleaning and maintenance
- 9 Troubleshooting
- 10 Warranty
- 11 Disposal
- 12 Technical data
EN
CFX3 Safety instructions
19
• Disconnect the cooling device from the power supply
– before each cleaning and maintenance
– after every use
Health hazard
• Please check if the cooling capacity of the device is suitable for storing
the food or medicine you wish to cool.
• Food may only be stored in its original packaging or in suitable
containers.
• Opening the cooling device for long periods can cause significant
increase of the temperature in the compartments of the device.
• Clean regularly surfaces that can come in contact with food and
accessible drainage systems.
• Store raw meat and fish in suitable containers in the device, so that it is
not in contact with or can drip onto other food.
• If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the lid open to prevent mould developing within the device.
A
NOTICE! Damage hazard
• Check that the voltage specification on the type plate corresponds to
that of the energy supply.
• Only connect the cooling device as follows:
– With the DC connection cable to a DC power supply in the vehicle
– Or with the AC connection cable to an AC power supply
• Never pull the plug out of the socket by the cable.
• If the cooling device is connected to a DC outlet: Disconnect the
cooling device and other power consuming devices from the battery
before connecting a quick charging device.
• If the cooling device is connected to a DC outlet: Disconnect the
cooling device or switch it off when you turn off the engine. Otherwise
you may discharge the battery.
• The cooling device is not suitable for transporting caustic materials or
materials containing solvents.
• The insulation of the cooling device contains flammable cyclopentane
and requires special disposal procedures. Deliver the cooling device
at the end of its life-cycle to an appropriate recycling center.
CFX3_OPM_APAC(en).book Seite 19 Mittwoch, 24. Juni 2020 11:07 11