Operating Manual
Table Of Contents
- 1 Explanation of symbols
- 2 Safety instructions
- 3 Scope of delivery
- 4 Accessories
- 5 Intended use
- 6 Function description
- 6.1 Scope of functions
- 6.2 Operating and display elements
- 7 Operation
- 7.1 Before initial use
- 7.2 Energy saving tips
- 7.3 Reversing the lid opening direction
- 7.4 Connecting the cooler
- 7.5 Using the cooler
- 7.6 Using the display
- 7.7 Locking/unlocking the display
- 7.8 Selecting the temperature units
- 7.9 Setting the temperature
- 7.10 Using the battery protection
- 7.11 Setting the display‘s brightness
- 7.12 Switching on or off the compartments (only CFX 3 75DZ, CFX 3 95DZ)
- 7.13 Using the ice maker (only CFX 3 55IM)
- 7.14 Downloading the CFX3 app
- 7.15 Setting the Bluetooth signal and connecting to the app
- 7.16 Setting the WiFi signal and connecting to the app
- 7.17 Changing CFX name and password in the app
- 7.18 Resetting the app password (WiFi only)
- 7.19 Resetting to factory settings
- 7.20 USB port for power supply
- 7.21 Defrosting the cooler
- 7.22 Replacing the AC fuse
- 7.23 Replacing the DC fuse
- 7.24 Replacing the DC plug fuse
- 7.25 Replacing the light PCB
- 8 Cleaning and maintenance
- 9 Troubleshooting
- 10 Warranty
- 11 Disposal
- 12 Technical data
EN
CFX3 Operation
29
Removing the ice maker housing
The ice maker housing can be removed for cleaning or when not in use to increase
usable space inside the cooler:
➤ Lift the housing at one end until the lug unclips, then remove.
➤ Reverse procedure for re-fit, pushing down on lugs to snap into position.
Tips for using the ice maker
• The ice maker makes ice fast for a number of hours after switching on and then
automatically goes into an ice maintenance mode to reduce energy
consumption. If multiple batches of ice are required as quickly as possible,
switching the ice maker off and back on will set it back into fast ice making mode.
Repeat as required.
• Low freezer temperature settings in the main compartment may not be main-
tained in high ambient conditions with the ice maker switched on.
Cleaning and drying the ice maker
➤ When not in use clean and dry the ice trays and inside the ice maker housing to
prevent mould.
➤ Following extended periods of non-use clean the inside of the ice trays with a
mild dish washing solution and rinse with clean water prior to use.
7.14 Downloading the CFX3 app
The cooler can be monitored and controlled via Bluetooth or WiFi using an app that
you can install on a compatible device.
➤ Download the CFX3 app from App Store or Google Play.
Note that the CFX3 app may not be available in your country.
CFX3_OPM_APAC(en).book Seite 29 Mittwoch, 24. Juni 2020 11:07 11