Operation Manual

EN
Operation CFX28 – CFX100W
20
I
✓ The cooler starts cooling the interior.
I
Latching the cooler lid
➤ Close the lid.
➤ Press the latch (fig. 2 1, page 10) down, until it latches in place audibly.
7.6 Setting the temperature
➤ Press the “SET” button (fig. 3 4, page 11) once.
➤ Use the “UP +” (fig. 3 7, page 11) and “DOWN –” (fig. 3 6, page 11) buttons
to select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
NOTE
Displayed temperature
• CFX28, CFX35W, CFX40W, CFX50W, CFX65W, CFX100W:
The temperature displayed is that of the large interior compartment
(e.g. CFX50W, CFX65W: fig. 7 1, page 19).
• CFX65DZ:
– With fridge/freezer divider in: The temperature displayed is that
of the freezer compartment (fig. 8 1, page 19).
– With fridge/freezer divider out: The actual compartment
temperature will be considerably warmer than the displayed
temperature
NOTE
When operating with the battery, the display switches off automatically
if the battery voltage is low. The LED “P” flashes orange.
CFX-28-CFX-65--B-EN-AUSv1.book Seite 20 Montag, 14. November 2016 10:53 10