Product Manual

EN
CPB101 Before initial use
15
5 Before initial use
The permitted gas pressure can be found on the type plate of the device.
Always use the supplied gas hose and regulator. If this becomes damaged please
contact the manufacturer‘s support (see back page) to organise a replacement.
Assembling the portable BBQ
➤ Proceed as follows: fig. 3, page 4 and fig. 4, page 5.
A
Treating the cooking surface of the BBQ
➤ Coat the cooking surface of the BBQ in a light coating of cooking oil.
➤ Connect the device to the gas cylinder (chapter “Connecting the device to the
gas cylinder” on page 16).
➤ Ignite the device (chapter “Igniting the device” on page 17) and set the burner to
low heat.
➤ Let the burner burn for 20 minutes.
During this time the original coating of the BBQ plates may come off.
➤ Turn off the device and allow it to cool.
➤ Clean the cooking surface.
NOTICE!
Failure to use supplied fibre washers will cause the enamel coating to
crack (see detail A in fig. 4, page 5).
DometicCPB101_IOM_4445103029_APAC(en).book Seite 15 Mittwoch, 20. Mai 2020 9:17 21