Wine cellar CS 32 D Instruction manual C... 825 12 30-00 .................
Operating and Installation Instructions for your Dometic Wine Cellar Introduction Thank you for choosing the Dometic Wine Cellar. Please read the following instructions carefully before installing your new wine cellar. We trust you will be completely satisfied with your purchase. The wine cellar must be installed and used according to these instructions in order for it to operate correctly and economically. Transit damage 30 mm FIG. 1 Inspect the wine cellar for transit damage.
°C 1 ON FIG. 2 (see fig. 2) The wine cellar is equipped with an electronic regulator. This allows you to programme the temperature inside the wine cellar. Your wine will then be stored between 10°C and 15°C according to expert advice. The temperature is shown on the display. The temperature, [pre-set at 12°C], can be changed according to the wine stored. 1. Press button [1] (see fig. 2). Message L1 will appear and the pre-set temperature is then shown shortly afterwards. 2.
FRONT PROFILE TOP Charcoal filter “Flûte d’Alsace” bottles FIG.
Electric diagram 6
MO-FO 0337 8
