User manual

Programme Degree of soil
Type of load
Programme
phases
Options
P6
4)
Rinse &
Hold
All Prewash
1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. (This is the standard programme for test institutes).
2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the
temperature and quantity of the water, the energy consumption and the programme duration.
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad
odours to come out from the appliance.
Do not use detergent with this programme.
Consumption values
Programme
1)
Duration
(min)
Energy
(kWh)
Water
(l)
170 0.64 7.5
70 - 110 0.5 - 0.8 5 - 9
70º
105 1.0 9
30 0.40 6
35 0.45 6
Rinse &
Hold
7 0.10 2
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the programme duration and the consumption values.
Information for test institutes
For all the necessary information for test performance. send an email to:
[e-mail]
Write down the product number (PNC) that is on the rating plate.
OPTIONS
Activate or deactivate the options be-
fore the start of a programme. You
cannot activate or deactivate the op-
tions while a programme operates.
If one or more options are set, make
sure that the related indicators are on
before the programme starts.
EnergySaver
This option decreases the temperature in
the last rinse phase.
The use of this option decreases the energy
consumption (up to 25%) and the pro-
gramme duration.
The dishes can be wet at the end of the
programme.
Press the EnergySaver button. The related
indicator light comes on.
5