User manual

• This option is selectable for all washing
programmes. The EnergySaver option
has no effect on some programmes. Re-
fer to the chapter 'Programmes’.
Extra Rinse
This option adds a cold rinse phase to the
washing programme.
The option increases the programme dura-
tion and water consumption.
Press the Extra Rinse button:
• If the option is applicable to the pro-
gramme, the related indicator comes on.
In the display you can see the update of
the programme duration.
Acoustic signals
The acoustic signals operate in these con-
ditions:
• The programme is completed.
• The level of the water softener is adjusted
electronically.
• The appliance has a malfunction.
Factory setting: off. You can activate
the acoustic signals.
Activating the acoustic signals
1. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
2. Press and hold function buttons (B) and
(C) at the same time until the indicators
of function buttons (A), (B) and (C) flash.
3. Press function button (C),
• The indicators of function buttons (A)
and (B) go off.
• The indicator of function button (C)
continues to flash.
• The display shows the setting of the
acoustic signals.
Off
On
4. Press function button (C) to change the
setting.
5. Deactivate the appliance to confirm.
BEFORE FIRST USE
1. Make sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener. Contact your local water au-
thority to know the water hardness in
your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the ap-
pliance. Start a programme to remove
them. Do not use detergent and do not
load the baskets.
Adjusting the water softener
Water hardness
Electron-
ic
adjust-
ment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
> 24 > 40 > 4.2 28 5
18- 24 32 - 40 3.2 - 4.2 22 - 28 4
12- 18 19 - 32 2.1 - 3.2 13 - 22
3
1)
4 - 12 7 - 19 0.7 - 2.1 5 - 13 2
< 4 < 7 < 0.7 < 5
1
2)
1) Factory position.
2) Do not use salt at this level.
Electronic adjustment
1. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode, refer to ‘Setting and
starting a programme’.
2. Press and hold function buttons (B) and
(C) at the same time until the indicators
6