User manual

- 10 -
Technical specifications
Service and spare parts
Servicing and repairs must be carried out by a service
company authorized by the supplier. Use only spare parts
supplied by these.
Before calling service, use the trouble shooting list ”In the
event of a fault” to try to attend to the fault yourself. If ser-
vice is called in to remedy a problem that is in this list,
there is a risk that you will be responsible for the cost.
This is also true if you have used the appliance for a pur-
pose other than it is intended for.
Note that electrical faults should always be rectified by a
certified electrician.
Give the appliance’s model designation, product- and
serial numbers according to the data plate affixed to the
rear of the dishwasher.
You can record these details here:
TYPE. ............................................................
MOD. ............................................................
PROD.NO. ............................................................
SER.NO. ............................................................
Purchase date............................................................
Service
Installation instructions
Capacity: 5 place settings accordance EN 50242
Dimensions: Height 460 mm
Width 450 mm
Depth 480 mm
Weight: Net 17 kg
Water pressures: Minimum 50 kPa (0,5 bar)
Maximum 1000 kPa (10 bar)
Water temperature: Maximum 25° C
Electrical data: Power supply 230 V - 50 Hz
Fuse 10 A
Heating element 1200 W
Power rating 1280 W