User manual

- 6 -
Controls and programme table
123
4
1 Temperature selector
55° - Button in
65° - Button out
2 Selector knob
To start the machine:
- Turn the selector knob clockwise to the programme
start. The ON/OFF switch is built into the programme
selector. To isolate the dishwasher from the mains
completely, unplug it from the wall socket.
During the water heating process, the timer
is standing still.
3 Cycle sequence lamp
While the programme is in progress, the operating
lamp is lit and it goes out when the programme is ready.
4 Salt indicator lamp
The operating lamp indicates when the salt needs to be
replenished. The lamp may remain lit for one or more
programmes after replenishment, which is fully normal.
Door lock
Press the handle down and open the door. Avoid opening
the door while the machine is running.
If the door is opened and is put standing ajar after a
completed programme, the dishes will dry faster.
- All figures are nominal and vary for example due to temperature variations on the inlet water.
- The figures apply to washing up 5 settings.