Contents For the installer For the user Safety information 3 Description of the appliance 4-5 13 Unpacking 14 - Damages - Use - Protecting the dishwasher against freezing - Positioning - Spray arm - Coarse filter/microfilter - Fine filter - Detergent dispenser - Rinse aid dispenser - Water softener - Cleaning the dishwasher The control panel Technical specifications Installation - Water inlet - Water drainage - Electrical connection 6 - How to set the delayed start Gebrauchsanweisung Adjusti
Safety information Before installing and first using the dishwasher, read this instruction booklet carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the dishwasher are thoroughly familiar with its operation and safety features. Save these instructions and make sure they remain with the dishwasher if it is moved or sold, so that everyone using it through its life can be properly informed on appliance use and safety.
Description of the appliance 4 5 -4-
Description of the appliance Spray arm (1) It is important to keep all the holes in the spray arm clear. A clogged hole can seriously affect washing efficiency. If the spray arm needs cleaning, unscrew the nut anticlockwise, remove the washer and lift off the spray arm. Clear the holes and shake out any food remnants. Coarse filter/microfilter (2) The purpose of the coarse filter is to catch large objects such as toothpicks and pieces of eggshell. Make sure that the filter is always clean.
The control panel Indicator and control lamps Indicator lamps delayed start On/Off button Delay start button Water softener button Functions button Control lamp Programme buttons Water softener and functions button: In addition to selecting a programme, you can press these two buttons to adjust the setting of the water softener. Indicator lamps: Control lamps: Shows • Current phase of the selected programme.
Adjusting the water softener To prevent limescaling on the dishes and to the interior of the dishwasher, the dishes must be washed with soft i.e. water with low lime content. This dishwasher is equipped with a water softener, where tapwater which is harder then 4 °d (german degree) is descaled with special salt. Contact your local Water Authority to find the exact water hardness level for your area.
Programme chart All types of dishes Type of dishes Plates and cooking pots Type of soil: • heavily soiled • normaly soiled • dried-on food remnants especially eggwhite and starch • dried-on food remnants • normaly soiled Coffee cups, delicate items • lightly soiled • lightly soiled Suitable programme: INTENSIVE 70° C Programmecycle: 1) Pre-wash Washing 2 x rinses Final rinse Drying NORMAL 65° C Pre-rinse Washing Rinse Final rinse Drying ENERGY SAVE 55° C 3) Pre-rinse Washing Rinse Final rinse
Using the appliance Starting the programme Pause function 1. Scrape or rinse off solid food remnants. With the paus function the programme can be temporarily disrupted for a short period of time. 2. Load the dishwasher. (See the basket and loading). 1. Press in the On/Off button. The programme stops. 3. Put the correct amount of detergent into the detergent dispenser and close the dispenser lid. 2. All lamps goes out. 3. When you want the programme to continue again, you press the On/Off button.
Loadind and unloading the dishwasher How to load the dishes Baskets The illustration shows the dishwasher loaded with six place settings. Your own dishes are not likely to be identical to this load, but if you follow the advice below we are sure you will be pleased with the results. Main basket Cutlery basket ● Always place glasses, cups and bowls upside down. ● Incline deep dishes (soup plates etc.) so that the water can run off when drying.
In the event of a fault Before calling out an engineer, please check through the details below because some faults can be rectified easily without the need to call out an engineer. If an engineer is called to resolve a problem listed below or to repair a fault caused by incorrect installation or mis-use a charge will be made, even if the appliance is under guarantee. Fault Check The programme will not start.
Service Service and spare parts Servicing and repairs must be carried out by a service company authorized by the supplier. Use only spare parts supplied by these. Before calling service, use the trouble shooting table ”In the event of a fault” to try to attend to the fault yourself. Note that electrical faults shall always be rectified by a certified electrician. Give the appliance’s model designation, product- and serial numbers according to the data plate affixed to the rear of the dishwasher.
Installation instructions Any electrical work required to install this appliance, should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance, should be carried out by a qualified plumber or competent person.
Unpacking Damages If the dishwasher has been damaged during transport, you should immediately notify the company responsible for delivering it. Check that the dishwasher is undamaged. If you discover any damage, faults or that anything is missing, you should notify the dealer immediately. Never leave packaging material in a place where children may play with it.
Installation Water inlet The dishwasher is equipped with safety features which are to prevent the water from going back to the fresh water system. These features are according to current water technical safety regulations. The temperature of the water supply should not exceed 65° C and the pressure should be between 80-1000 kPa (0,8 - 10 bar). It is important to have a tap or stopcock, positioned close to the dishwasher and with easy access.