Operation Manual

Description of Control Elite Control Operations Manual
2 L-2230 ENGLISH
FAN
Fan-speed operation is automatic, allowing fan speed to decrease as set-point temperature is approached in the Cool Mode.
The fan operates at low speed when set point is satisfied.
Normally the automatic fan speed operation is reversed in the Heating Mode, however, you can program the fan to operate the
same as in the Cooling Mode.
Press the Fan button to select manual fan speeds if you want to override automatic operation. You can program the fan to run
only during a cool or heat cycle, otherwise the fan runs constantly.
MEMORY
The Elite has nonvolatile memory requiring no batteries or backup power. When power is lost, the operating parameters are
retained indefinitely. When power is restored, the control resumes operating as last programmed.
Figure 1: Elite Display Panel and Indicators
Table 1: Elite Display - Diagram Legend
1
Power button
8
Heat Mode indicator
2
Temperature sensor
9
Moisture Mode indicator
3
Digital display
10
Mode button
4
Auto Fan indicator
11
Fan button
5
Manual Fan indicator (high, medium, low)
12
Down button - Lower temperature set point
6
Auto Mode indicator
13
Up button - Raise temperature set point
7
Cool Mode indicator
1
2
3
45
6
7
8
9
10111213