Operation Manual

EN
Before initial use FreshJet
26
8 Before initial use
Inspection before starting up
Before you switch on the roof air conditioner, observe the following:
➤ Check whether the supply voltage and frequency correspond to the values
specified in the technical data, see leaflet.
➤ Ensure both the air intake opening and the air nozzles are free. All ventilation
grilles must always be kept free to ensure that the roof air conditioner is able to
operate at maximum capacity.
!
Setting the time
➤ Set the current time: see chapter “Setting the time” on page 35.
Set the remote control
➤ Insert the batteries (see chapter “Replacing the remote control batteries” on
page 34).
✓ The display shows all symbols for 5 seconds.
➤ Press simultaneously the
button and the button during this 5 seconds.
✓ The display shows the default model number.
➤ Press simultaneously + and – button within 3 seconds to select the model
number:
– FreshWell3000: 02
–FreshJet: 07
–FreshLight: 11
✓ The display shows all symbols for 5 seconds.
✓ The remote control is ready for operation.
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the intake
grille.
FreshJet-ADB2015-O-16s.book Seite 26 Donnerstag, 1. Februar 2018 12:02 12