Operation Manual

EN
FreshJet Operating the roof air conditioner
29
With the control panel
The figure shows how to use the control panel to switch the roof air conditioner on,
off or to stand-by. Press the button as shown in the illustration:
Example: The roof air conditioner is in stand-by mode. You want to switch it off.
Briefly press the button.
The roof air conditioner is switched off.
With the remote control
I
9.5 Selecting the air conditioning mode
Select the air conditioning mode of your choice using the MODE key, see
chapter “Air conditioning modes” on page 24.
The roof air conditioner confirms the receipt of the values with a high note.
The roof air conditioner is switched to the selected air conditioning mode.
NOTE
The roof air conditioner can only be operated by the remote control
when it is switched on or in stand-by mode.
You can use the remote control to switch the roof air conditioner to
and from stand-by mode. Press the button.
Available for models with heating only:
If you switch of the roof air conditioner from the “Heating” ( ) mode
using the remote control the blower continues working for a few min-
utes to avoid an overheating of the device. The LED flashes orange.
Press the button of the control panel to completely switch off the
roof air conditioner.
press
and
hold
press
briefly
press briefly
press and hold
Roof air conditioner switched off
Stand-by mode
Roof air conditioner switched on
FreshJet-ADB2015-O-16s.book Seite 29 Donnerstag, 1. Februar 2018 12:02 12