Operation Manual

EN
FreshJet Cleaning the roof air conditioner
35
9.14 Setting the time
The remote control needs the current time in order to program the timer. The time is
indicated on the display of the remote control.
Perform the following steps to set the time:
I
➤ Press and hold the button for 2 s.
✓ The time flashes on the display of the remote control.
➤ Use the + or – button to set the current time.
Press the + or – button longer than 2 s to increase or decrease the time quicker
➤ Press the SET button to confirm the time.
9.15 Setting the winter mode
The winter mode is a special heating mode that starts at a temperature of 7 °C and
stops when the temperature rises above 10 °C.
➤ Press both buttons on the control panel board for 5 s to activate the winter mode.
✓ The LED flashes green/yellow.
✓ All other functions are deactivated.
➤ To deactivate the winter mode press the button on the control panel to turn
off the air conditioner.
10 Cleaning the roof air conditioner
A
NOTE
The remote control returns to its initial mode and saves the current
setting, if no key is pressed on the remote control for 15 seconds while
setting the time.
NOTICE! Beware of damage
• Do not clean the roof air conditioner with a high-pressure cleaner.
Exposure to water can damage the air conditioner.
• Do not use sharp or hard objects or cleaning agents for cleaning as
these may damage the roof air conditioner.
• To clean the roof air conditioner, use water with a gentle cleaning
agent. Never use petrol, diesel or solvents.
FreshJet-ADB2015-O-16s.book Seite 35 Donnerstag, 1. Februar 2018 12:02 12