miniBar à usage professionnel HA 10A HA 10B Mode d'emploi Operating Instructions 207.5184.
GB Please read these operating instructions carefully before putting the refrigeration unit into operation. If you later sell or dispose of it, please ensure that the new owner receives these operating instructions. Please follow the installation details below carefully Guarantee is valid for products installed as described only. (See chapter 4.1) Thank you for choosing our appliance. We are sure it will provide you with trouble-free use.
GB CONTENT S 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Unpacking View of the appliance Cleaning Positioning the appliance 4.1. Installation instruction 4.2. Mounting the sliding hinge Using the appliance 5.1. Temperature regulation Ice cubes Useful suggestions Defrosting, cleaning and maintenance Changing the lightbulb Customer service Putting into operation, technical data 11.1.
GB 1. Unpacking After removal from the cardboard packaging, make sure the appliance is not damaged. If you find damage to the appliance resulting from transport, report it immediately to the transportation firm. 2. View of the appliance HA 10 Figure 1. 1. Door 5. Fixing foot 2. Thermostat knob 6. Corner part of the sliding hinge (on certain models) 3. Evaporator 4. Sensor 10 7.
GB 3. Cleaning Clean the refrigerator thoroughly at intervals, as necessary. Remove the shelves; these, the cabinet interior and the door should be washed with a warm solution of sodium bi-carbonate. Finally wipe over with a cloth rinsed in warm water only, and dry with a clean cloth. Do not wash any plastic parts in water that is more than hand warm, and do not expose them to dry heat. The outside of the cabinet should be wiped down regularly with a clean, damp cloth.
GB 4.2. Mounting the sliding hinge (on certain models) According to the drawing attached to the sliding hinge set. The corner parts is fixed to the door frame of the refrigerator. 5. Using the appliance To start the refrigerator connect the plug to the socket outlet and switch on the socket. The cooling fins should show signs of cooling after about 3 hours. The refrigerator needs about 6 hours at normal ambient temperature to reach 6 °C in the storage compartment.
GB In the event of a fault developing, contact your nearest Service Centre-see local telephone directory. 11. Putting into operation Technical data: Model Type Gross volume Mains operation Input Energy consumption Climate class Refrigerant HA 10A - HA 10B MF20-60 41 litre 220 - 240V (AC) 90W 1.07 kWh/24h N 245g NH3 +H2O 11.1 Connecting to electrical mains The appliance may only be operated from nominal voltage mains as shown on the data plate.
14
15
Printed by Xerox Hungary Ltd. Rev.: 2003. 07. 31.
