Product Manual

EN
a
Operating the roof air conditioner Harrier series
18
✓ The switch-on time is set on the roof air conditioner.
The roof air conditioner is switched on with the selected air conditioning mode
at the specified time.
✓ The OFF symbol flashes on the display of the remote control.
If no OFF time is needed press the button again without changing the hour value.
➤ Use the + or – button to set the number of hours until the air conditioner will be
switched to stand-by.
➤ Press the button again to confirm the value.
✓ The switch-off time is set on the roof air conditioner.
Switch the roof air-conditioner to Stand-by.
Cancelling timer settings
If you have set the timer, you can cancel these settings as follows:
➤ Press the button once.
✓ The timer symbol disappears.
✓ The setting has been cancelled.
7.10 Activating the sleep function
I
When the sleep function is activated, the compressor speed and the fan speed is
limited to a lower level to reduce the noise levels for easier sleeping.
➤ Set the required temperature (see chapter “Setting the temperature” on
page 16).
➤ Press the button.
✓ The symbol appears in the display.
The sleep function is activated.
➤ To deactivate the sleep function press the button again.
I
NOTE
The sleep function is only available in “Cooling” ( ) or ”Heating" ( )
modes.
NOTE
The sleep function is deactivated if the MODE button is pressed.
Harrier-Lite_OPM.book Seite 18 Montag, 27. April 2020 3:25 15