User manual

10
Decor panel
Measurements
Thickness 0,4 mm
Changing the decor panel
4.10
4.10.1
4.10.2
H x W (mm)
RH 030 ltr 492 x 294,5
RH 040 ltr 524 x 311,5
RH 060 ltr 533 x 376,5
Hole for door lock (a)
diameter O 23,5 mm
distance from the edge (h) 62 mm
W
H
h
a
- Loosen the lower door hinge and pull out the door ( see 4.9).
- Remove clamp ring of the doorlock (A) (putted on).
- Loosen and remove lower frame piece (B) (not srewed).
- Pull out the decor panel (C) with a low curvature.
- Push in the new decor panel in such a way that the upper edge runs
exactly parallel to the upper section of the frame.
Put on frame piece (B).
- Put the door on the lower hinge, insert the hinge pin in the door, push in
the door and let the hinge click in.
A
C
B
Note (appliances without doorlock):
- Additional installation of a door lock is possible.
- In the door the position for the opening is prepared.
- Drill the hole in accordance to the drawing above.