PORTABLE AUTOMATIC ICE MAKER HZB-12A/HZB-12SA USA SERVICE OFFICE Dometic, LLC 2320 Industrial Parkway Elkhart, IN 46516 CANADA Dometic, LLC 46 Zatonski, Unit 3 Brantford, ON N3T 5L8 CANADA Service Center Assistance Visit our website: WWW.EDOMETIC.COM or WWW.RV.COM INSTRUCTION MANUAL It is important that you read these instructions before using your portable ice maker and we strongly recommend that you keep them in a safe place for future reference. Form No.: 106014003DP0 WWW.DOMETICUSA.
TABLE OF CONTENTS TROUBLESHOOTING IMPORTANT SAFETY INSTRUCTIONS………………………...…….….2 PREPARING YOUR ICE MAKER FOR USE……………………….…….3 IMPORTANT SAFETY TIPS………………………………...………………3 GETTING TO KNOW YOUR ICE MAKER ……………….…………….5 OPERATING PROCEDURES & MAINTENANCE…………………….…7 PROBLEM “Add Water” indicator is on. POSSIBLE CAUSE Stop the ice maker, fill water, and press “ON/OFF” button again to restart the unit. Lack of Water. UNPACKING YOUR ICE MAKER… ……………….…………...…………....7 Remove ice from ice basket.
4. The ice making cycle lasts approx. 5 to 13 minutes, depending on seletion of ice cube size and the room temperature. The recommended room temperature is 50°F to 100°F 5. While the ice maker is on, check water level periodically. If water pump can’t inject water, the ice maker will stop automatically, and the “Add Water” indicator will be on.Press “ON/OFF” button, fill water up to the max. water level mark and press “ON/OFF” button again to turn on the unit again.
PREPARING YOUR ICE MAKER FOR USE IMPORTANT SAFETY TIPS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance. Do not operate this,or any other appliance with a damaged cord. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
OPERATING PROCEDURES & MAINTENANCE Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion. UNPACKING YOUR ICE MAKER Do not tip over. 1. Remove the exterior and interior packaging. Check if ice basket and ice scoop are included. If any parts are missing, please contact our customer service. 2. Remove the tapes holding ice shovel, ice basket & ice scoop. Clean the interior tank & ice basket with lukewarm water and a soft cloth. 3.
GETTING TO KNOW YOUR ICE MAKER General Information Postion of control panel & functions 1. Ice scoop. 2. Ice full sensor 3. Ice basket 4. Top cover with transparent window 5. Air outlet 6. Water drain cap: at bottom front of the unit. 7. MAXIMUM WATER LEVEL: ▲ Remove the ice basket, you can see the water level mark. Control Panel: Easy to use, visible functions and 1-touch display. A. Select ice cube size: Small or Large. B. Power indicator C. Ice-Full indicator D .Water shortage indicator E.