Manual

AU
IBIS4 Operating the roof air conditioner
17
7.10 Activating the sleep function
I
When the sleep function is activated, the compressor speed and the fan speed is
limited to a lower level to reduce the noise levels for easier sleeping.
➤ Set the required temperature (see chapter “Setting the temperature” on
page 15).
➤ Press the button.
✓ The symbol appears in the display.
The sleep function is activated.
➤ To deactivate the sleep function press the button again.
I
7.11 Replacing the remote control batteries
Replace the batteries if you see the symbol on the display.
The battery compartment is on the back of the remote control.
➤ Gently push down the lid of the battery compartment and slide it open in the
direction of the arrow.
➤ Insert the new batteries (2x type AAA) in the remote control as indicated in the
battery compartment.
➤ Close the cover of the battery compartment.
B
Protect the environment!
Do not dispose of batteries with general household waste.
Return any used batteries to your retailer or take them to a collection
point.
NOTE
The sleep function is only availabe in “Cooling” and “Heating” mode.
NOTE
The sleep function is deactivated if the MODE button is pressed.
IBIS4--O.book Seite 17 Montag, 5. November 2018 7:56 19