User manual

Fixation of the floor plate of the base station

Fixation of the toilet

Inserting the cassette

6.2

1. The floor plate of the base station is fixed to the rear

wall.

The floor has two lugs (A), that have to be pushed

into the respective gaps in the rear wall of the base

station.

Make sure that the connection (B) for the carbon

filter fits into the place provided!

2. The floor plate of the base station is screwed to the

floor of the vehicle.

3. The ventilation hose (C) is conducted through the

vehicle floor to the exterior.

1. The toilet must be installed horizontally. .

2. Use the screws included in the delivery for fastening it

to the floor of the vehicle.

3. The screws are then covered with the four caps.

The floor and the cassette are in dovetail design.

The cassette can easily be pushed into this opening until the lock in the groove (D) not-

ches.

6.3

6.4

Distance to the rear

wall : min. 50 mm