Operation Manual
Mounting the stove Dometic ORIGO
12
7 Mounting the stove
You can fit the stove into the countertop of your kitchen.
7.1 Selecting the installation location
When selecting the installation location, observe the following instructions:
z Select a well-ventilated location for the device.
z Avoid draft at the installation location.
If you fit the stove in an open cockpit or other open areas mount an
additional wind protection.
z Do not operate the device in spaces where danger of explosion is
present.
7.2 Installing the stove
a
Caution – Danger of damaging the device!
Before drilling any holes, make sure that no electrical cables or oth-
er parts of the vehicle can be damaged by drilling, sawing and filing.
➤ Cut a rectangular hole into the countertop (dimensions see following
table):
➤ Open the top and remove the canisters.
➤ Place the stove in the middle of the cutout.
➤ Mark the drill holes.
Use the drill holes at the rim of the stove as template.
➤ Pre-drill the holes into the countertop where marked.
➤ Fasten the stove by screwing flat head screws through each drill hole at
the rim.
➤ Place a class B-1 fire extinguisher in reaching distance.
Model Dimensions in mm
2000 345 x 320
2500 345 x 320
4100 575 x 320
4300 575 x 320
_Origo_2000_2500_4100_4300.book Seite 12 Montag, 29. September 2008 5:50 17