RA/RM - 1D RA/RM - 2D 0402 Svenska sida 3 Norsk side 7 Dansk side 11 Suomi sivu 15 Français page 19 Nederlands pag.
OPERATING AND INSTALLATION INSTRUCTIONS FOR REFRIGERATORS RGE 300 and RGE 400 INTRODUCTION CONTENTS We are pleased that you have chosen this refrigerator and hope you will derive much satisfaction from using it, but first a few well-meant words of advice: OPERATING INSTRUCTIONS ........................ 32 It is important to read through these instructions carefully before using the refrigerator.
OPERATING INSTRUCTIONS 240 V Operation CONTROLS • Set the energy selector (A) to position I . REGULATING THE TEMPERATURE The position number refers to fig. 1. It will take several hours for the refrigerator to reach normal operating temperature. The temperature of the main compartment of the refrigerator is controlled by a thermostat. The thermostat knob (B) should be set at 3-5. If a lower (colder) temperature is desired, set the thermostat to a higher figure.
Place the food items back inside but wait until the refrigerator is cold before making ice cubes. The sealed cooling system must not be opened, since it contains corroding chemicals under high pressure. CLEANING THE REFRIGERATOR Clean the inside of the refrigerator regularly to keep it fresh and hygienic. Soak a cloth in a solution consisting of a teaspoon of bicarbonate of soda to half a litre of warm water. Wring out the cloth and use it to clean the interior of the refrigerator and its fittings.
ELECTRICAL CONNECTION The electrical installation must be carried out in a proper and durable manner, taking into account all relevant regulations and codes of practice.
MO-FO 0327
