User manual

9
Changing the Decor Panel (optional with RH 400 LR)4.10
- Unscrew the 2 screws of the upper door hinge.
- Pull the door and the hinge off, away from the housing and in an upward
direction from the lower hinge pin (2-3).
- Unscrew the screws (4) and pull off the frame section (5).
- Pull the decorative panel (6) out of the door frame and push in the new
decorative panel (7) in such a way that the upper edge runs exactly
parallel to the upper section of the frame.
Put on upper section of frame (5) and re-fasten with screws (4).
- Set the door on the lower hinge, put the upper hinge in the door, guide
the door with the hinge into the hinge hole opening and screw together.