Service manual

BULLETIN 4
MAY 1983
Replacement of cooling units in RM760.
Cooling unit will replace 530A in production and service.
When installing as replacement for 530A three new holes should be drilled in the cooling
flange.
New holes
1 (29 mm)
down.
0
Furthermore the hole for the air channel (no longer necessary) in the burner box should be covered
by a piece of aluminium tape (No combustible material must be used).
Cover this hole
D-9-17
Manual Compliments of
Northwest RV Supply
Printed From
http://www.nwrvsupply.com