User manual

8
Switching off
To terminate gas operation, turn knob (B) to the "OFF" position.
To terminate gas operation, turn the switch/es to the "OFF" position (A in RM2191)
and (A and E in RM2193).
Place the toggle switch(es) for DC and AC operation to the "OFF" position or turn the gas
valve to position "OFF", as applicable. See FIG. 1.
When not in use, the refrigerator should be emptied, cleaned and dried and the door left
open so that fresh air can circulate inside.
The travel latch placed in the second hole will hold the door ajar and allow air to circulate.
Defrosting
To defrost, take out any food, etc. then turn off the gas valve or switch of the DC/AC sup-
ply to the refrigerator. Leave the refrigerator door open and place a suitable dish or other
receptacle under the evaporator to catch the defrost water.
When all the frost has melted, any remaining drops of water in the refrigerator should be
wiped up with a clean cloth.
Note:
The layer of ice must never be removed forcibly, nor may defrosting be
accelerated using a heat source.
Storing food
 Always store food in sealed containers, aluminium foil or similar.
 Never put hot food into the refrigerator; always let it cool first.
 Products that could emit volatile, flammable gases must not be stored in the
refrigerator.
The two-star freezer compartment is suitable for making ice cubes and for short-term
storage of frozen food.
It is not suitable as a means of freezing foods.
Door locking
Switching off gas operation
If the refrigerator is to be taken out of service for an
extended period of time, the on-board shut-off valve and
the cylinder valve must be closed.
park position
open
closed
5.4
5.3
5.5
5.6