User manual

- 9 -
Hole for drain
water hose
Hose
Boiler
casing

coNNectioNs

Hook up to the gas supply line is accomplished at the manual


examined for leaks using a solution of liquid detergent and
water.
The gas supply system must incorporate a pressure regulator
to maintain a supply pressure of not more than 11 inches water
column. When testing the gas supply system at test pressures:
 - the refrigerator and its individual shutoff valve
must be disconnected from the gas supply piping system.
 - the appliance must be isolated from the gas
supply piping system by closing its individual manual shut-
off valve.
If detailed instructions on the installation and connection to
the gas supply are required, please contact your dealer or
distributor.

The gas safety shut off must be tested after the refrigerator is
connected to LP gas supply.
RM2354, RM2454, RM2554, DM2662, DM2663,
DM2862, DM3862, NDM1062 & NDR1292
To test the gas safety shut off, follow these steps:
1.
2.
indicator lamp is on.
Close the manual gas shutoff valve at the back of the 3.
refrigerator.
4.

should be off.
Remove the protection cover. 5.
Open the manual gas shutoff valve. Do not change 6.
any button positions on the control panel.
7.


bubbles indicates a defective gas safety shutoff, and
service is required.
8.
rinse it with fresh water. Be careful not to damage the




boiler casing. Seal around the hose that goes through the drilled
hole and ensure that it does not kink when run through the

in order for the water to drain outside of the vehicle. If not, the
installer will have to supply the extra length of hose.
Drill the hole in the
cut out opening of
the base plate
Hole for drain
water hose
Boiler
casing
Hose


Hole for drain
water hose
Boiler
casing
Hose

installation procedure
WARNING




6
!