User manual

- 9 -
MOUNTING INSTRUCTIONS
CHANGING THE DOOR SWING
Open the door and remove the two screws holding
the top decoration. The screws are accessible from
beneath.

Unscrew the bottom hinge pin.


lower hinge pin.
Screw the lower hinge pin in the hole from which
the plastic cap was removed.
Before replacing the door on the refrigerator, remove
the catches and move them to the opposite side of
the cabinet.
The holes are covered with plastic caps that must be
removed and inserted in the holes that previously
held the catches.
Unscrew the handle and move it to the opposite side
of the door.
Insert the plastic caps into the holes left open on the



of their removal.

door closes easily and the gasket seals well on all
sides.

2.



6.
7.
8.



REFRIGERATOR REMOVAL
To remove the refrigerator, follow these steps:

Loosen the screws anchoring the refrigerator to the
enclosure.
Slide the refrigerator out of the compartment.

refrigerator, make sure the sealing strips are properly posi-


2.

Before removing the refrigerator:

Shut off the gas supply.
Disconnect the gas supply line at the rear of the refrigerator.
-
ing connections.


