Operating instructions

13
CHANGING DOOR HINGES FROM ONE
SIDE TO THE OTHER
The refrigerator is equipped with a convertible door. To
change the door swing, consult the parts manual for the
Conversion Kit Number. For further information, please
contact Dometic Corporation listed on the front page.
INSTRUCTIONS FOR MOUNTING THE
DOOR PANEL
The refrigerator is normally delivered without door panel.
Before starting the mounting work, check that the panel
dimensions are in compliance with those given in the
table and the instructions are read thoroughly.
When mounting the panel, proceed as follows:
See figure page 14.
A. Open the door 90 degrees.
On new refrigerators, the decoration strip is taped
inside the door; if installed on the door, remove the
door decoration strip (2) by removing its three
screws (1).
B. Insert the vertical edges into the grooves of the
door frame (3).
C. Push the panel downward so that the lower hori-
zontal edge of the panel (4) is fitted into the bottom
groove (5).
D. Put the decoration strip across the door so that the
gap is covered.
Secure the decoration strip with the three screws
removed in Step A (1).
SPARE PARTS
The following list is a list of commonly used parts, which
should be available, if required, from your Dometic Ser-
vice Center.
A = RM 2452; B = RM 2453
Part No. Description
17 37 71-01/5 A B Heater, 175W, 120V
17 37 39-06/1 - B Heater, 175W, 12V
200 74 19-16/7 A B Jet, No.43
293 03 79-00/9 A B Electrode
293 06 97-06/1 A B Burner
293 17 96-01/1 A B Piezo lighter
293 25 75-01/8 A B Door shelf, lower
293 25 76-01/6 A B Door shelf, 2 pieces
293 26 67-01/3 A B Baffle
293 26 70-01/7 A B Handle (light brown)
293 26 70-02/5 A B Handle (black)
293 27 50-02/5 A B Door reversing kit,
right-left (light brown)
293 27 50-03/3 A B Door reversing kit,
left-right (light brown)
293 27 50-13/2 A B Door reversing kit,
right-left (black)
293 27 50-14/0 A B Door reversing kit,
left-right (black)
Contact an authorized service center for
parts and repairs as needed.
PANEL DIMENSIONS
MAX. THICKNESS 5/32" (4 mm)
REFR. MODEL HEIGHT WIDTH
TYPE MAX. MIN. MAX. MIN.
RM 2452 mm 827 825 527 524
RM 2453
inch 32-9/16 32-1/2 20-3/4 20-5/8