User manual

- 7 -
OPERATING INSTRUCTIONS
STARTUP
Before starting the refrigerator:
Check that all the manual gas valves are in the ON position.
Make sure that a continuous 12V DC supply is available for
the electronic control to function.
To start the refrigerator:
Press the ON/OFF button.
Select operation mode:
AUTO
AES/AUTO mode
(
RM 3862
)
AC and GAS
Press the AUTO/GAS - AES/AUTO/GAS mode
selector button (if not already on). The illuminated
lamp indicates the selected mode.
(If the CHECK indicator lamp is illuminated, see
REFRIGERATOR OVERVIEW > MODES OF
OPERATION > AUTO MODE - AES/AUTO MODE
for
further information.)
GAS mode
GAS operation only.
Press the AUTO/GAS mode selector button to turn
off the AUTO mode (if not already off).
(Within 45 seconds the burner should be ignited
and operating normally. If not, see
REFRIGERA-
TOR OVERVIEW > MODES OF OPERATION > GAS
MODE
for further information.)
DC mode
(3-way models only)
Press the DC mode indicator button. The DC lamp
will be turned on. To select AUTO or GAS mode,
turn off the DC mode by pressing the DC mode se-
lector button. The DC lamp will then be turned off.
If applicable, adjust the thermostat by pressing the
Temperature selector button.
(
RM2351-2451-2551-2652-2852:
The temperature
is controlled by a factory preset temperature setting.)
•
•
1.
2.
•
•
•
3.
TURNING ON THE CLIMATE CONTROL
RM2652-2662-2663-2852-2862 & NDR1062
Turn the Climate control switch to I (ON).
RM3862 & NDR1062
Press the CLC button. The indicator lamp will
illumate.
TURNING ON THE LOW AMBIENT CONTROL
NDR1062
Turn the Low ambient control switch to I (ON).
RM3862 & NDR1062
Press the LAC button. The indicator lamp will
illuminate.
TURNING OFF THE REFRIGERATOR
The refrigerator may be shut off while in any mode of opera-
tion by pressing the main power ON/OFF button to the OFF
position. This shuts off all DC power to the refrigerator, includ-
ing the interior light.
If the refrigerator will not be in operation for a period of weeks,
it should be emptied, defrosted, cleaned and the doors left ajar.
The ice trays should also be dried and kept outside the cabinet.
The Climate control switch
is located beneath the top
decoration panel that houses
the control panel.
ON
OFF
AC
GAS
CHECK
AES
AUTO
COLD
1
2
3
4
5
COLDEST
CLC
LAC
L
A
C
The Low ambient control
switch is located beneath the
top decoration panel that
houses the control panel.
ON
OFF
AC
GAS
CHECK
AES
AUTO
COLD
1
2
3
4
5
COLDEST
CLC
LAC
CLC