User manual

- 7 -
MODEL EQUIPPED WITH DOOR INSERT PANELS
Reversing door swing
The refrigerator is equipped with hinges that makes it possible
to change the direction the door opens by moving the hinges
to the opposite side. A special hinge kit must be used in order
to change the door swing. For spare part numbers, refer to the
USER MANUAL (825125600), APPENDIX A - SPARE PARTS
. For
additional information, please contact service point or distribu-
tor service dept. for assistance.
Installing door panels
The refrigerator is delivered without door panel(s). Before
starting the mounting work, read this instruction thoroughly
and check that the panel dimensions are in compliance with
those given in the table below.
Panel dimensions
max. thickness 5/32" (4 mm)
Model
Height
max
min
Width
max min
RM3762
upper
inch
17-3/64
16-31/32
23-25/32
23-11/16
mm
433
431
604
602
lower
inch
32-7/16
32-23/64
23-25/32
23-11/16
mm
824
822
604
602
RM3962
upper
inch
17-3/64
16-31/32
23-25/32
23-11/16
mm
433
431
604
602
lower
inch
41-39/64
41-9/16
23-25/32
23-11/16
mm
1057
1055
604
602
MOUNTING INSTRUCTIONS
MODEL EQUIPPED WITH STEEL DOORS
Installing door handles
The handle is shipped as a loose part. Attach the handle with
two screws as shown below.