User manual

1. Manual ignition

1. Open the valve of the gas cylinder.

2. Open the shut-off valve to the gas supply.

7. Release igniter button (C). Keep rotary switch (B) depressed for another 10-15

seconds, then release.

8. Check the flame indicator to see whether a flame is burning.

9. Repeat the entire process if the flame has gone out.

10. Use rotary switch (B) to regulate the temperature in the main refrigerator compartment.

2. Automatic ignition (RM 6291, RM 6401)

4. Keep rotary switch (B) depressed for another 10-15 seconds, then release.

5. Check the inspection glass (if existing) to see whether the flame is burning.

6. Adjust the temperature in the main refrigerator compartment using rotary switch (B).

Note:

If the flame goes out, the ignition system will repeat the ignition process automatically.

3. Set energy

selector switch

(A) to

4. Press and hold

rotary switch (B)

5. Activate Piezo

ignition (C)

several times at

intervals 1-2

seconds.

6. Check the inspection glass to

see whether there is a flame

(the inspection glass is insi-

de the refrigerator at the

bottom left).

5. Activate ignition

by pressing the

button (C) and

keep it depressed.

6. Once the flame has been ignited

and is burning, the needle of the

galvanometer passes over into the

green section.

Manual ignition with Piezo igniter :

Manual ignition with battery igniter :

1. Set energy

selector switch (A)

2. Press and hold

rotary switch (B).

3. The ignition process is activated automatically,

accompanied by a ticking sound; the indicator

lamp (D) will flash. Upon successful ignition, the

sound and the flashing will stop.