User manual

Defrosting
As time goes by, frost builds up on the fins.
When the layer of frost is about 3mm thick, the refrigerator should be defrosted.
1. Switch off the refrigerator, as described in Section 5.9 - "Switching off".
2. Remove the ice cube tray and food.
3. Leave the refrigerator door open.
4. After defrosting (freezer compartment and fins free of frost), wipe the cabinet dry
with a cloth.
5. Use a cloth to mop up the water from the freezer compartment.
6. Switch the refrigerator back on again.
The layer of ice must never be removed forcibly, nor may defrosting be
accelerated using a heat source.
Note:
Water thawing in the main compartment of the refrigerator runs into an appropriate
container at the back of the refrigerator. From there, the water evaporatesr
Winter operation
1. Check that the ventilation grilles and the extractor have not been blocked by
snow, leaves or similar.
11
5.7
5.8
2. When the ambient temperature falls below +8°C, the optional winter covers
should be fitted. This protects the unit from excessively cold air.
Lower ventilation grille ( L200 )
Upper ventilation grille with flue vent ( L100)
3. Affix the cover and fasten it.
You should also attach the winter cover if
the vehicle is taken out of service for a lon-
ger period or while it is being cleaned from
the outside.
TTIIPP