User manual

13
Changing the decor panel5.12
1. Open the door
and loosen the
hinge screw.
2. Take off the door
by moving it upwards.
3. Unscrew the door strip
(3 screws).
4. Remove the decor
plate and insert a new
decor plate.
5. Screw the door
strip back in
position.
6. Put the door
back on.
7. Tighten the
hinge screw.
Dimensions of the panels (mm) :
Model Height Width Thickness
RM 6290 718 +/-1 491,5 +1 3,2
RM 6291 718 +/-1 491,5 +1 3,2
RM 6401 718 +/-1 491,5 +1 3,2
RM 7270 730 +/-1 453,5 + 1 3,2
RM 7270 + 741 +/-1 462,0 1,8
RM 7290 730 +/-1 491,5 + 1 3,2
RM 7290 + 741 +/-1 500,0 1,8
RM 7360 730 +/-1 453,5 + 1 3,2
RM 7360 + 741 +/-1 462,0 1,8
RM 7370 730 +/-1 453,5 + 1 3,2
RM 7370 + 741 +/-1 462,0 1,8
RM 7400 730 +/-1 491,5 + 1 3,2
RM 7400 + 741 +/-1 500,0 1,8
RM 7540 730 +/-1 491,5 + 1 2,6
RM 7550 741 +/-1 500,0 2,6
The + sign describes models with curved door.