User manual
17
INSTALLATION GUIDE
On installation of the appliance, the technical and administrative regulations of the
country in which the vessel will first be used must be adhered to. Otherwise the
refrigerator must be installed as described in these instructions.
In Europe, for example, gas appliances, cable laying, installation of gas
cylinders, as well as approval and checking for leaks must comply with
EN 1949 for liquid gas units in vessels.
Installation
The appliance and its fume extraction shall be installed in such a way as to be acces-
sible for servicing at all times and must be capable of easy removal and installation.
The appliance may only be installed by authorised personnel.
Installation and connection of the appliance must comply with the latest
technical regulations, as follows:
Technical regulations, EN 1949
Technical regulations, EN 732
Technical regulations, EN-ISO 10239
Technical regulations, EN 624, ch. 5.5.2 , 6.5.2.2 (leak test at sealed
combustion systems)
The electrical installation must comply with national regulations
( for Europe EN 60335-1, EN 60335-2-24, EN 1648-1 , EN 1648-2).
The gas installation must comply with national regulations.
Local and building control department requirements
The appliance shall be installed in such a way that it is shielded from
excessive heat radiation.
Excessive heat impairs performance and raises the energy consumption of the
refrigerator.
66..00
6.1
Any installation that is not carried out by qualified persons will jeo-
pardize the manufacturers guarantee.