User manual

19
Ventilation and Air Extraction
The correct installation is important for correct operation of the appliance to ensure,
there is no build-up of heat at the back of the appliance. The heat must be allowed to
escape into the open air.
In the event of high ambient temperatures, full performance of the cooling unit
can only be achieved by means of adequate ventilation and extraction.
6.3
The illustrations show the air vent when the
refrigerator is installed .
1 = Opening Fresh Air Inlet
2 = Ventilation Grille
3 = Cold air going in
4 = Warm air coming out
Note: The fresh air inlet (1) must have
a clear cross section of at least
200 cm
²
(no ventilation grille).
The ventilation grille (2) must have a
clear cross section of at least
200 cm².
Do not install this way !
4.
2.
3.
1.
Ventilation