User manual

6
Switching On the Refrigerator
 The refrigerator is silent in operation.
 When the appliance is first put into operation, there may be a mild odour which will
disappear after a some hours. Ensure the living area is well ventilated.
 The freezer compartment should be cold about one hour after switching on the
refrigerator.
 The refrigerator will take several hours to reach its operating temperature.
 Before the refrigerator is put into operation at the gas mode or when the leak test
is carried out, the siphon (a) on the rear has to be filled with 20 ml of water. It is
recommended to use the water separator (b) while building in the appliance before
the fume and ventilation system is mounted. Otherwise use the flue pipe (c) for
filling in the water.
Controls
Note :
The refrigerator is equipped to operate mains power, DC or liquid gas.
The desired power option is selected by means of energy selector switch (A).
Energy selector switch (A) has four settings:
O (off), Gas (liquid gas), 230V (AC mains power), 12V (DC) .
5.2
5.2.1
b.
c.
a.
flue outlet
flue pipe
A = energy selection switch
B = gas/electric thermostat AC/DC
C = operating displays (3 LEDs)
A
B
C
AC mains power
12V DC
Gas
OFF